This guide shows how to reset configuration yealink ip phone series to default factory configuration. This method is usually conducted for several reasons, for example forgot username and password to log in (see default password and username), the new configuration could not be saved, and many more causes. This way is the first step to resolve aforementioned problems.
Ok, there are 3 ways reset yealink ipphone to default factory configuration :
1. Hardware Reset
Hold down the OK button a few seconds, and then the display will appear warning "Reset to Factory", hit OK again to confirm the reset. This ways can be used for a series of ip phone Yealink, such us T2 Series IP Phone Yealink ( SIP-T19P, SIP-T20P, SIP-T21P E2, SIP-T22P, SIP-T23P, SIP-T23G, SIP-T26P, SIP-T27P, SIP-T28P, SIP-T29G), T3 Series (SIP-T32G, SIP-T38G), and T4 Series (SIP-T41P, SIP-T42G, SIP-T46G, SIP-T48G), VP530.
Please see the picture below :
 |
| This is an example for T19P |
3. Recovery mode update firmware
This is the last way, if the both ways fail. You have to do a recovery mode update firmware on your yealink ipphone.
1. How to recovery mode update firmware on yealink ip phone T2 series
2. How to recovery mode update firmware on yealink ip phone T3 series
3. How to recovery mode update firmware on yealink ip phone T4 series
4. How to recovery mode update firmware on yealink ip phone W52P
0 Response to "Reset default factory yealink ip phone"
Post a Comment